of Braze
Source: Webster's dictionaryBetween the blocks, and soldered or brazed to them, are one or more strips of low temperature coefficient of resistance (TCR) manganin alloy. Source: Internet
For low temperatures, junctions can be brazed or soldered, however it may be difficult to find a suitable flux and this may not be suitable at the sensing junction due to the low solder melting point. Source: Internet
On the next run, the bearings worked satisfactorily but the stresses were too great for the brazed impeller and it flew apart. Source: Internet
Bearing pads are brazed on to prevent fuel bundle to pressure tube contact, and inter-element spacer pads are brazed on to prevent element to element contact. Source: Internet
The fuel elements have small appendages that are resistance brazed to the fuel cladding using an induction brazing process with Be as the braze filler material. Source: Internet
The seam is brazed, using a torch and smoothed using a hammer or file. Source: Internet